Staining Process

1) ‘A’ grade timber selection
• No large knots
• Homogeneous colour

2) Sanding is critical and differs according to the end colour required. Sandpaper varies between 180 and 240 grit. Each finish requires an intricate process to be followed.

3) Control of the manufacture of the stain
• Checked against standard colour samples – we have a man ‘on the ground’ overseas, working with the stain manufacturer.

4) Stain is wiped on to each component, using an intricate process to control the colour.

5) After wiping, the stain is coated with sealer (a type of lacquer), giving a foundation for a good colour build.
• Sanded and colour matched.

6) Product is then toned by application of colour without lacquer. Others tone with colour in the lacquer, causing the possibility of chipping and leaving white spots.

7) A second coat of sealer is applied.
• Sanded again.

8) A top coat is applied.